Next I prepared the rudder servo levers. The rudder shaft had to have a piece cut from each to allow the bolt to go through. These will have to be in place before the rear deck is mounted, and therefore the propellers will have to be in place, as they cannot be fitted after the rudders are in place. I am thinking about how and when the running gear is to be primed and painted as the propellers are brass and I don't want to get paint on the part. Thursday, April 13, 2006
Next I prepared the rudder servo levers. The rudder shaft had to have a piece cut from each to allow the bolt to go through. These will have to be in place before the rear deck is mounted, and therefore the propellers will have to be in place, as they cannot be fitted after the rudders are in place. I am thinking about how and when the running gear is to be primed and painted as the propellers are brass and I don't want to get paint on the part. 
Subscribe to:
Post Comments (Atom)
2 comments:
For more accuracy and a longer lifetime without any play it's best to use Robbe servo levers. They fit instantly on the rudder shafts. White metal is nice, but wears out to soon.
Thanks, I have spoken to people at the shows and they have said exactly the same thing
Post a Comment